Nowadays, most of us prefer to keep sewing machines in our homes. We prefer it to alter new clothes, repairing worn out and torn clothes as a way to customize our dresses as per our requirements. Whilst operating machine chances are needle may break down or you may run out of battery and things of that nature.
This article emphases on the five most identified hitches related to working on a sewing machine. Through this post, you will be educated enough to classify those problems the next time you work on a sewing machine. Additional, you may take suitable actions and events to overawed and evade them as much as probable.
5 Common Sewing Machine Problems
Gathering up of the thread
The ideal way to classify this problem is to check whether there are any loops of extra thread huddled up at the bottommost part of the cloth. Now, this tricky thing can source your fabric to loss, so correct events wish to be taken to get rid of this problem.
Initially, you need to eliminate the sewing from the sewing machine, and expurgated the extra thread by scissors. At this stage, if not done correctly, there are odds that the sewing machine may get injured lastingly. Once you have detached the fabric, all you require to do is eradicate the threads prudently.
This is one of the most conjoint and the major problem confronted by people who regularly work on sewing machines. Occasionally, if proper care is not given, there are odds of accidents. For this reason, this problem has become one of the grave matters while working on a sewing machine.
To challenge this state, initially stop sewing. Then prudently eliminate the damaged needle and throw it in the trash can. Then, carefully insert the correct needle and precaution into the sewing machine. Once you have done this, you are all set to restart your sewing!
Repeated breaking of threads
For this type of a concern, you must form the type and value of thread you are consuming in your sewing machine. This is because there are some threads which are intended particularly for hand sewing resolutions, and cannot be castoff with a sewing machine.
Likewise, though you are re-threading your machine, you must make sure that the pressure foot is detached while stringing. This way, you can evade this problem manually, that too in a modest way!
Uneven bobbin tension
If you feel that you have to adjust the tension in the bobbin thread now and then, you must check for the bobbin itself. This is because, in the case of the plastic bobbin, the tension in the thread becomes less within the bobbin housing itself. Hence, using a good quality bobbin will help you avoid this problem.
The needle gets unthreaded itself
Everybody can fathom the efforts you made to pass the strand over the eye of the needle, and when the needle emanates for sewing, it is found to be unthreaded. This can lead to consumption of your time and efforts. Consequently, to avoid this state, all you require to do is to recap the same procedure, but with the needle place at the top. For this, you need to switch the hand wheel towards your course. The needle will not unthread this time certainly!